A skid steer backhoe attachment turns your loader into a digging machine, so you can cut trenches, dig footings, and clean out ditches without renting an excavator. The attachment mounts to your quick-attach plate and runs off your machine's auxiliary hydraulics, with the boom, dipper, and bucket worked from a seat on the attachment itself. Digging depth is the number that matters most: most reach between 6 and 10 feet, and the deeper units need more machine behind them to stay stable. Check your loader's rated operating capacity before choosing a model. If you're only setting fence posts, a skid steer auger is faster and cheaper.
Sale price
$3,151.70 USD
Regular price
$3,503.00 USD
-10%
Unit price/ per
Sale
Frequently Asked Questions
What size skid steer do I need to run a backhoe attachment?
Most skid steer backhoe attachments call for a machine with at least 1,500 to 2,000 lbs of rated operating capacity, and the deeper-digging models want more. Weight
matters as much as hydraulics here — an undersized loader will lift its front wheels before the bucket is full. Check the attachment's minimum machine requirement
against your loader's ROC and auxiliary flow, and contact us if you're not sure where yours lands.
How deep can a skid steer backhoe attachment dig?
Digging depth on most skid steer backhoe attachments falls between roughly 6 and 10 feet, depending on the model and boom length. Deeper units require a larger,
heavier host machine to stay stable through the swing and the pull. If you know the depth your jobs demand — footings, water lines, septic laterals — start there and
work backward to the attachment size, rather than buying on price alone.
Do I need high flow hydraulics for a backhoe attachment?
No. Backhoe attachments run on standard auxiliary flow, so a high flow machine is not required. What matters more is having a functioning auxiliary circuit with
adequate pressure, plus a case drain only if the specific model calls for one. Standard flow skid steers in the 15 to 25 GPM range run these attachments without
trouble. Check the model's spec sheet, and reach out if you need help reading it.
Is a backhoe attachment better than a mini excavator?
It depends on how often you dig. A backhoe attachment costs far less than a dedicated machine and uses a skid steer you already own, which makes it the better call for occasional trenching and footing work. A mini excavator digs faster and swings 360 degrees, and it earns its keep if excavation is most of what you do. For mixed work where digging is one job among many, the attachment usually wins.
Join Our Program
Sign Up For Free Give Aways and Promotions
Choosing a selection results in a full page refresh.
Opens in a new window.
Tom
True HD
I have two of these buckets. One with weld on teeth the other with the bolt on smooth edge. The tooth buckets is truly a bad boy when it comes to digging dirt. Lol I have a JCB 225 I use these buckets on and with a large cubic inch engine they have exceptional low end torque. I can dig hard dirt very easily and hardly above idle and this pushes in and gets a heaping buck immediately. Very HD buckets I will be long gone and buried before these buckets are even look used and decades before they are worn out. These are high quality industrial attachments. Berlon in my opinion builds wonderful attachments in there HD line. Highly recommended.
I got one and with a loader hitch conversion I use it on my John Deere tractor. It works amazing! So far I am super happy with it! Thanks for the product and the free shipping.
Well built and very good purchase. It beats mulching on trails or even clearing property to ready to build sites. No stumps to deal with or mess to clean up. I have worked over 60 hours with one and made several miles of trail for riding horses on . With in a few months they look like they have been there for years. I’ve cleaned up fence line covered with pines and no mess left behind. If you want a cleared clean finish job it is the way to go. I pull everything out by the roots and burn it or mulch the pile when I’m done. Attached are a few pictures of what I’ve pulled up with ease.
Tree Puller | Blue Diamond
Tom
Looks like a huge time saver
I just picked this grapple up as well as an HD skeleton rock grapple bucket. Both of these look like they will come in handy for clean up around my rental properties. I am sure they will pickup the large amount of tenants left over property that sometimes a tenant will leave behind. I actually bought this one to load broken up cement after I have used a breaker on it. I am expecting this to work well at the jobs I have planned for it. So much easier to load a my dump trailer mechanically than by hand in fact I am handicapped and these will make some jobs I can do without hiring someone to do them for me. All the burlon pieces I have work well and are strongly built.
I bought one of these to make it easier to park trailers into my backyard trailer parking lot. This makes it easy to park my group of trailer into the yard. I am located mid alley so it is very tight to back them in with a truck and I am packing the seven of them in a small space. This one a great tool for the jod. The one thing that makes this my first choice is that it is long enough so you can turn the trailer hard on direction one way or the other. Very strongly built. Very easy to see the ball which makes it a snap to pickup a trailer hitch with. Highly recommended
I have bought seven pieces of Berlon attachments in my opinion they make incredibly well made and well engineered items. Highly recommended!