Skid Steer Log Splitters

A skid steer log splitter turns firewood production from a two-machine job into one operator working from the cab. The attachment runs off your auxiliary hydraulics, so you get far more splitting force than a towable gas unit and you never lift a round off the ground. Tonnage is the first decision: higher tonnage handles knotty, seasoned, and large-diameter wood that stalls a smaller ram. Cycle time is the second, and it matters more than tonnage once you are producing volume. Look at whether the wedge is fixed or adjustable, and whether the model offers a four-way wedge for fewer passes per round. Pair one with a grapple to handle rounds without leaving the seat.
Read More

7 products

Frequently Asked Questions
How much tonnage do I need in a skid steer log splitter?

For clean, straight rounds under about 16 inches, lower tonnage is plenty. Knotty hardwood, seasoned rounds, and anything over 20 inches in diameter need more force, and under sizing here shows up as a ram that stalls partway through a split. If you are producing firewood commercially rather than heating one house, buy more tonnage than you think you need.

Does a log splitter need high flow hydraulics?

Most run on standard auxiliary flow, so a high-flow machine is not required. What flow affects is cycle time rather than splitting force: more flow moves the ram faster, which matters a great deal once you are working through a full cord. Check the model's rated flow range against your machine's GPM, and expect slower cycles at the bottom of that range.

What is a four-way wedge and do I need one?

A standard wedge splits a round in two. A four-way wedge splits it into four pieces in a single pass, which roughly halves the handling for a given volume of firewood. The tradeoff is that four-way wedges need more force to drive through, so they pair best with higher-tonnage models. For occasional use a standard wedge is simpler and cheaper.

Can I split wood vertically with a skid steer splitter?

That is one of the main advantages of an attachment over a towable splitter. Because the loader arms position the attachment, you can bring the splitter to the round rather than lifting a heavy round onto a horizontal beam. For large-diameter rounds that two people would struggle to lift, this is the difference between a manageable job and a back injury.

Will a log splitter fit my skid steer?

Log splitter attachments mount to the universal quick-attach plate used by virtually all full-size skid steer and compact track loaders. The constraints are hydraulic flow and weight rather than the mount itself. Confirm your machine has a working front auxiliary circuit, and check the attachment weight against your rated operating capacity. Contact us with your model if you are unsure.